-------------------------------------------------------------------------------------- --- History of changes of software for Comet devices --------------------------------- -------------------------------------------------------------------------------------- 2.1.7367.23596_dbapi-19.0 (March 4, 2020) * CommService v. 2.1.7165.18912 * Sigfox: support of new device types * ULogger Configuration: Added function "not support text message sending" * Text correction 2.1.7289.30236_dbapi-19.0 (December 16, 2019) * CommService v. 2.1.7165.18912 * FIXED - Bug after copying ULogger configuration with secure. 2.1.7282.35090_dbapi-19.0 (December 9, 2019) * CommService v. 2.1.7165.18912 * Configuration ULogger - add sending to COMET Cloud option 2.1.7229.25380_dbapi-19.0 (October 21, 2019) * CommService v. 2.1.7165.18912 * Configuration ULogger - optimization of pressure options 2.1.7194.21773_dbapi-19.0 (September 12, 2019) * CommService v. 2.1.7165.18912 * Configuration ULogger - validation of unit: Allow slash in user text 2.1.7180.15393 (August 29, 2019) * CommService v. 2.1.7165.18912 * Fixed: Device detection on USB interface was able to quietly fail due to FTDI driver error. This could cause that no HID devices was found. * Function Copy to clipboard was added to charts. * Configuration ULogger: fine-tuned texts and UI * Configuration ULogger: added estimation about how long the device keep recording until full memory will be reached for the current configuration * Configuration ULogger: added function Factory Default * ULogger: Device security implemented * ULogger: Added function for support of "Get diag file" * New behavior of the device list after program start: Only devices, which are physicaly connected to the PC at the time of program start, are added to the list. (except Multiloggers - original behaviour retained) * Running the program with command line parameter "moreClients" allows running multiple instances of the program. 2.0.7033.26098 (April 4, 2019) * CommService v. 1.0.7033.23577 * FIXED: ULogger configurating, entering PIN: leading zeros was mistakenly trimmed. 2.0.7033.18219 (April 4, 2019) * CommService v. 1.0.7033.23577 * FIXED: Download from ULogger device failed when memory is full and non cyclic record. 2.0.7025.33816 DBAPI 19.0 (March 27, 2019) * CommService v. 1.0.7019.30473 + New database structure 19.0 2.0.7019.30636_dbapi-18.0 (March 21, 2019) * CommService v. 1.0.7019.30473 * FIXED: Bug of downloading record of logger with specific configuration 2.0.7006.13815_dbapi-18.0 (March 8, 2019) * CommService v. 1.0.6991.24982 * Set format of date and time by local pc * FIXED: ULogger: Show user calibration + ULogger: support of new firmware version (0.0.114) + ULogger: added new function (Battery exchange) + Sigfox: support new device type W0832 + Sigfox: added new function (Switched off device) in service mode + Added checking that ComService is running * FIXED: ULogger: adjustment of probe + Added option set offset of adjustment in service mode 2.0.6962.18061_dbapi-18.0 (Januray 23, 2019) * CommService v. 1.0.6942.21373 * FIXED: Malfunction export to CSV and Comet Database in Autodownload 2.0.6946.23064_dbapi-18.0 (Januray 7, 2019) * CommService v. 1.0.6942.21373 + New database structure 18.0 2.0.6900.30506 DB 17.0 (November 22, 2018) * CommService v. 1.0.6715.28674 * FIXED: Sigfox channel alarm limits setting bug (1st channel alarms was not set). 2.0.6872.16320 DB 17.0 (October 25, 2018) * CommService v. 1.0.6715.28674 * ULogger - additional options of data sending. * ULogger - support of new device types. 2.0.6824.14659 DB 17.0 (September 9, 2018) * CommService v. 1.0.6715.28674 * FIXED: Some specific configuration changes caused program crash. * FIXED: Changes in the list of probes of cable length correction setting. 2.0.6759.11893 DB 17.0 (July 3, 2018) * CommService v. 1.0.6715.28674 + Autodownloader - add export to CSV * FIXED: Multilogger configuration - delete email recepients. * FIXED: Add result of sending email (Multilogger). * FIXED: Some text corrections. 2.0.6751.23751 DB 17.0 (June 26, 2018) * CommService v. 1.0.6715.28674 + ULogger - additional options of channel alarm delay settings * FIXED: Error of msx file creating in RSLogger autodownload * FIXED: Deadlock of bulk export to DB * FIXED: Saving of the D4130 configuration disables the pressure channel recording. * Texts revision 2.0.6724.23837 DB 17.0 (June 01, 2018) * CommService v. 1.0.6715.28674 + Sigfox: Enable/disable remote sensor settings (fw 1.0.0 and higher) * Sigfox: Improved information that data sending is switched off. + ULogger: Settings of Delete unsent data. + ULogger: Settings of JSON protocol version. * ULogger: Decoding and visualization of the records with information about problematic modem action. * ULogger: URL validation in modem configuration part. * RSLogger: More information about problem when the record is internally switched off. * Text revisions and languages update 2.0.6674.21515 DB 17.0 (April 10, 2018) * CommService v. 1.0.6642.28680 * Languages updates + support of new database structure 17.0 2.0.6649.22904 DB 16.1 (March 16, 2018) * CommService v. 1.0.6642.28680 * Some changes in communication layer * ULogger fw update improvement * Automatic updates improvement * FIXED: records decoding bugs fixes * FIXED: Probe cable correction - cable length setting in probe selection mode is missed 2.0.6635.28531 DB 16.1 (March 05, 2018) * CommService v. 1.0.6633.28200 + CommService version info in try icon + New software design + Software is only free now! + Support of new Sigfox devices + Updates checking + Reports + ULogger service mode + Mass files export to the database + One-point user's calibration for counter input/channel + Show SIM PIN value + Chart data from table filter + Confirmation dialog when you want to remove channel + Counter erasing + The device can be added to the autodownload device list from autodownload settings + Title of custom display is displayed in tab title * Changes in display settings (devices and channels selection for display) * Language updates (cz, pl, nl) * FIXED: Some special action of character inserting caused program crash * FIXED: Probe cable correction settings bug * FIXED: Unit for counter input/channel in Multilogger settings * FIXED: No SIM PIN changes when you save configuration * FIXED: Empty data file loading bug * FIXED: Program crash when you go to service mode and device is disconnected 1.3.6467.25972 DB15 (September 15, 2017) + Main panel can be positioned (to left or right window side). * New communication service (ver. 1.0.6465.14610) * Polish language review. * Spanish language review. * Some changes according to fw version of ULogger device. * FIXED: Communication servis is not installed when polish or spanish language is used. 1.3.6450.18917 DB15 (August 29, 2017) + ULogger - Factory default. + ULogger - Adjustment. + RSLogger - Battery change function. + Localized pictures of screen help. * New communication service (ver. 1.0.6445.25688) * Some text revision. * FIXED: Autostart settings are writting to wrong address area. No autostart values are set. It may cause problems with battery recharging. * FIXED: Switched description of binar states in ULogger binary channel. * FIXED: Record reading changes according to new device firmware version. * FIXED: When no device is selected for autodownload, empty page is shown. * FIXED: No password verification is used with some protected functions when security is enabled in RSLogger and/or Commeter. * FIXED: Wrong values in selection of Mute reactivate interval. 1.3.6424.17571 DB15 (August 3, 2017) * FIXED: Print can cause program crash. 1.3.6422.15899 DB15 (July 31, 2017) + Support of new U Logger devices. + Support of new M1200E device. + Support of DBAPI 15.0 + Switch on/off button in RS Logger home panel. + Program version in the program window header. + U Logger device firmware upgrade. + Values of counting quantities in the record. + Conversion of pressure units. + Export to XLS: New list with device information in exported xls document. + Verification if data is being exported before close the program. + Summary printing. * New communication service (ver. 1.0.6407.27207) * Series visibility in chart legend according to series visibility in chart. * Statistics: decimals according to device configuration. * FIXED: Incompatible mss/msb/msx file causes program crash. * FIXED: Date time writing to RS Logger errors. * FIXED: Record decoding errors in headers and analog channels counting. * FIXED: Cyclic record decoding errors (RS Logger). * FIXED: Memory capacity in time computing mismatch in information of rest days (RS Logger). * FIXED: In password dialog, if no password was inserted, program crashed. * FIXED: Some text corrections. 1.3.6418.22437 DB15 RC (July 28, 2017) * Internal, RC 1.2.6345.25027 (May 16, 2017) * FIXED: Export to excel file (binary input cells data) * FIXED: New version of DLL report libraries 1.2.6340.14362 (May 11, 2017) * FIXED: Autodownloader service: behavior of enabled mode "If last autodownload failed or missed run next autodownload immediatelly" * FIXED: Uninstaller stops autodownloader service * FIXED: Export to excel file (cells data types) 1.2.6320.20754 (April 21, 2017) + New: Autodownload will check a missed downloads after start and download them. * FIXED: Program did not show the downloaded data in specific case of data. 1.2.6295.12877 (March 27, 2017) + New: CO2 meassurement interval setting changes (added option: 15 seconds ) in Multilogger. * FIXED: When timeout of edit mode in Multilogger configuration is expired, the program crashes. * FIXED: When print a grahp in Brother printer, the program crashes. 1.2.6248.22277 (February 8, 2017) + Add save file dialog when downloading data. 1.2.6236.25705 (January 27, 2017) + New database structure 14.0 + open file dialog: default filter for all data files * FIXED: open file dialog was not initialised on the path from folder options 1.2.6235.29611 (January 26, 2017) + Autodownloader - folder options - posibility to choose how to create subfolder for data files (by SN / by Device Name) + Button for copying database connection parameters from program settings to Autodownloader settings * FIXED: Reactivation with already used key lead to misunderstanding message "Wrong key" * FIXED: installation lead to stop communication service when in the system is already newer version of communication service installed 1.2.6227.28731 (January 19, 2017) - internal + Can sort device list on Add device tab. + Can select more devices in device list on Add device tab. * FIXED: Added checking if folder path is correct when changing it in program settings. * FIXED: Highlighting when alarm2 is active in graph (Online display, Multilogger). * FIXED: Set interrupt of graph by time of PC not device (Online display). * FIXED: Set default language for all users from installation. * Autodownloader settings update. * Text revision and languages update. 1.2.6213.25080 (January 04, 2017) - internal * FIXED: Bug in adding device from ethernet out of local network. 1.2.6211.24171 (January 02, 2017) + Computed quantities (only for the Logger devices of series R and S) + New diagnostic information * FIXED: Some of the configuration items is not updated in configuration summary after having been changed. * Revision of the items in program options * Texts revision and languages update 1.2.6198.16628 RC (December 20, 2016) - internal + Support of Commeter D (only models D0211, D0221, D3120, D3121, D3631, D3633, D4130, D4141) * Communication service 1.0.6198.26537 * Languages update 1.1.6157.15194 (November 23, 2016) * FIXED: Installation of FTDI drivers 1.1.6152.27729 (November 07, 2016) Official Release * fixed: Device identification changes in xport search * Communication service (version 1.0.6152.25356) 1.1.6151.22838 (November 04, 2016) * Internal version for testing * Languages translation changes 1.1.6151.19235 (November 03, 2016) * Internal version for testing * Communication Service 1.0.6149.24699 + communication changes (configuration writing of counter logger) 1.0.6148.28667 (October 31, 2016) + Support of RS Logger devices 1.0.5997.21568 (June 3, 2016) * testing version (no release) + new: dutch language + new: polish language + new: spanish language 1.0.5967.22792 (May 4, 2016) Official Release * Communication Service 1.0.5962.16823 + czech language + diagnostic tool + logging to file + service mode + more filter parameters + testing emails + factory default 1.0.5700.29984 (August 10, 2015) + Settings for ethernet interface powered from batteries + Export of record to .xls and .pdf + added button for canceling zoom in record chart fixed: CustomDisplay for Multilogger type M1322 fixed: memory management (memory releasing failed when more records opened, known from 15/07/2015) 1.0.5688.23636 (July 29, 2015) + Installer automatically stops Communication service and Communication service monitor. + File association: MS msx file detected instead of error notification. + Device list panel: User can collapse it. + Stroring display view settings for next app start. + Min app window width changed from 1024px to 800px - usefull for tablet devices with screen rotated to portrait + ConnectionIdent: string info more user friendly fixed: some texts review fixed: OEM SW: Online Activation: entering company info disabled. fixed: Verify licence on start up: License file: FileShare.ReadWrite. fixed: CommService: Erase data memory wrapped with SetupAct.RecordDwnlInProgress. fixed: CommService.GetUsbDevices DeviceIdent.SerialNumber initialized to NULL. 1.0.5680.29272 (July 21, 2015) + New Multilogger FW 1.1.6 supported. 1.0.5645.23813 (June 16, 2015) fixed: configuration info text changes 1.0.5645.22867 (June 16, 2015) fixed: Memory management: event uselessly held reference 1.0.5644.14122 (June 15, 2015) + added view of ALARM OUT channel to data table. * configuration font size changes * configuration information changes * configuration input initialization changes * Online display options changes 1.0.5638.23116 (June 09, 2015) * first official version 1.0.5602.25070 (May 04, 2015) * internal version + first testing version 1.0.5603.16735 (May 05, 2015) * internal version fixed: Windows XP problem with config files